Detune Your Snowboard: What, Why, and How?

Lightly trace the edges with the file until they become slightly dull. Feel the sharpness of the edge by pressing your finger down on it. Practice on the edges at the tip and tail of your board to find the right amount of dullness.Every year I’ll tune my snowboard a month or two before the season starts mostly out of anticipation for the season itself.

Personally, I’m a freerider, so a tuned board is crucial. And I’m sure a lot of our readers have tuned their board at one point or another. But have you ever detuned a board? Why would you even want to do that? Sounds like something stupid to do. Believe it or not (you better believe it), there are some cases that detuning a board is a good idea.

What does Detuning a Snowboard Mean?

Detuning a board is more about reshaping your edges than dulling the edges, since most snowboard edges protrude from the board at 90 degrees. Though, the 90 degrees is what you want in general as it provides the best grip for carving into the snow. When hitting rails though, you’re usually moving much slower, not really carving, and worried about landing on your butt too often.

This is where detuning is plays its role. Instead of maintaining a 90 degree edge profile, you can detune your board so they protrude at a smaller angle, thus prevents you from catching as much edge.

When/Why Should I Detune my Snowboard?

• Riding rails, boxes, bent trees…
• If you’re a beginner and worried about catching too much edge.
• When you’re in the mood to muck about/butter on the snow.

How do I Detune my Snowboard?

You can do it yourself or take it into your local snowboard shop. For beginners who just bought a brand new board, I urge you to take it into your local store and have them take care of it. If you have an older board and are comfortable detuning it yourself, here’s how:

You’ll need:

• Course File – can be found at any hardware store.
• Diamond Stone – used to polish your edges.
• Clean Cloth

The steps:

1. Find the widest part of your board at the nose and tail (these are the contact points). It’s the section of edge that’s most likely to catch an edge.
2. Start an inch back from that point and use the course file to round out the edge toward your nose. Repeat with the tail end.
3. Now for a light detune of the entire edge. Divide your edges into 3-4 equal sections (including the contact point edges you just filed)
4. Place the file on your edge at about a 45 degree angle and make a pass over each of the sections. This will give each section a light detune.
5. Feel for the edge and do another pass over if you necessary.
6. Remove the edge shards with your clean cloth – this is important, so don’t forget to do it.
7. Polish your snowboard’s edges with the diamond stone to buff out all the micro burrs left behind.

Video

Tips

• Files work in 1 direction so keep that in mind when filing your edges.
• Dull your edges to about 88 degrees – anything more than that will be a waste and could damage your board.
• East coast riders should be careful as to not over do it… with our snow conditions, we need our sharp edges.
• Some boards come factory detuned so find out if your board is factory detuned or not before attempting to detune it.

Shaun White Pulls of a Double Mctwist 1260

Shaun White pulled off an insane new trick at the final Grand Prix practice under the lights at Park City, namely a double McTwist 1260. Here’s some footage of White warming up:

Snowboarding Eye Candy #3

These pictures are so cool that I’m tempted to steal my buddy’s pro camera but I love snowboarding way too much not to ditch the camera the second I see the snow. If any of guys and girls are photo junkies please feel free to send your pictures in.

◄ Back

Next ►

Picture 1 of 7

Sahara Sandboarding Video

If you’ve never sandboarded before, this will look more glamorous than it really is. Not to say sandboarding isn’t fun, it’s just not what you think.

Helmets Reduce the Risk of Head Injuries by 35%

Some suggest that helmets may increase the risk of neck injury in a crash or fall, particularly in children because of their greater head to body ratio.

Skiing and snowboarding are popular winter activities. Did you know that head injuries account for up to 19% and neck injuries up to 4% of all injuries reported by snow patrols and emergency departments? Traumatic brain injury is the leading cause of death and serious injury among skiers and snowboarders. I know a lot of riders don’t like helmets because they’re uncomfortable or they don’t look cool, but trust me, hospital beds are pretty uncomfortable and very uncool!

An analysis of 12 studies conducted in Europe, Asia, and North America, found that helmet use in recreational activities is beneficial. However, the authors were unable to determine the effect of the design, quality, or fit of the helmets.

“The use of helmets significantly protects against head injuries among skiers and snowboarders,” write Brent Hagel, Alberta Children’s Hospital, and coauthors. “Risks of head injury can be reduced by 35%…and between 2 and 5 of every 10 head injuries among helmet users could be prevented.”

I don’t need a study to tell me something so logical, but for those in denial or are on the fence about buying a helmet, I hope this is a good wake up call. Here’s a link to the scientific study on helmets and head injuries.