Category: Reviews

2010 Ride Machete Review

Posted in Reviews, Snowboards by Rami | Tags: , ,

A guest post by David Zemens, snowboarder from Metro-Detroit and author of Shredding Gnar Snowboarding Blog.

2010 is the first year for the RIDE Machete, and it’s been getting rave reviews just about everywhere. I jumped on the bandwagon and bought one over the weekend, so I’m throwing my review out there for all the world to read, hopefully this helps you out!

Conditions: very-hard pack, light dusting of man-made + real snow, some ice, ~22F and windy

Length: 161cm Wide

Tech Specs:

  • Available Sizes: 52, 55, 57W, 58, 60, 61W, 62, 64
  • Sidecut: LowRize rocker
  • Shape: Twin
  • Stance: Center
  • Flex: 6.5ish/10 stiff
  • Retail price: $429

First Impressions: The Machete is flat between bindings and reverses from foot to tip/tail, a very mild rocker. I thought adjusting to this from camber was pretty much effortless. The edges are beveled 1 degree, and I’m pretty sure this saved me once or twice on the icy.

Switch/Pop: Rode switch nicely, but this is to be expected on true twin. It had a good amount of pop and was awesome stable landing ollies off rollers & small park jump (I didn’t go big).

Stability/Handling: The Machete handled speed very well (thank you, slimewalls!!!), landed jumps effortlessly, and pressed with the best of them.really suits me; even though I want a “park” board I’m really more of an “all mountain” rider who sometimes hits park jumps and very occasionally wipes his ass on boxes & rails. The Machete held its edge well on the very-very-hardpack, didn’t wash out on icy patches. The “slimewall” has an amazing ability to absorb chatter. I’d ride over frozen snowmobile tracks expected to get that chop-chop-chop-chop but nothing. Smooth sailing broseph.

Flex: RIDE says the flex on the Machete is 6/10 but I thought it had waaaay more flex than the most recent park board I’ve ridden (’09 Burton X8)—I was able to practically double the height on my tail presses. This flex lends to the overall playful feel of this deck, but don’t be put-off by that if you’re looking for a charger.

Overall: I probably wouldn’t use this for my “powder” board, and I might not prefer it for bombing black diamonds and steeps, but for an all-around board that’ll cruise the groomers and be equally comfortable rocking out in the park for a few hours, you can’t go wrong.

It’s almost February, and if you’ve been considering a new deck and you want to be able to use it for the remainder of this shred season, try and find one of these, but do it quick. Sources tell me that RIDE is selling out of the Machetes and quickly, so when they’re gone from the shelves, they’re gone for good.

2010 Burton Custom V-Rocker Review: It’s Not What You Think

Posted in Reviews, Snowboards by Rami | Tags: , , , , ,

There’s no better known snowboarding stick out there than the Burton Custom. And if there’s a snowboard that Burton is known for, it’s the Custom board.

In line with all the improvements, redesigns, reintroductions, etc… Burton added their own version of the reverse camber technology to their most popular snowboard and I finally got a chance to try it out over the weekend. Here’s my review:

Conditions: Very cold and icy.
Setup: Burton Mission Bindings.

Technology Worth Mentioning

  • V-rocker: A three-stage rocker that features a center rocker between your feet, with additional rockers outside each foot that lift the tip and tail completely off the snow. This thing can definitely rock!
  • Directional Shape: The classic, most versatile snowboard shape, designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while still giving you plenty of float and control to rip any terrain or snow condition.
  • Pressure Distribution Edges: The edges beneath the binding area extend out slightly for tremendous edge hold on hard, icy conditions, while remaining ever playful in soft snow. Honestly, I wonder how much of a difference this actually made, because the board did not hold its edge on ice.
  • Feel Level 4: The board’s stiffness level is set at roughly 40%, where Feel Level 1 is least stiff, and Feel Level 10 is most stiff.

Expectations - Given Burton’s Custom snowboard great track record, the rocker design, and more importantly the hype I’ve heard and read, I was expecting this thing to rock the mountain.

First Impression - Burton’s Custom V-rocker is a fun board to muck about and butter the snow with as the rocker shape nicely lifts up the tips and gives you a center base to pivot on. Unfortunately this meant the board did not hold any edge on icy/somewhat icy surfaces. I felt uncomfortable bombing down the mountain, and the V-rocker does take some getting used to. But boy did I have a blast switching and doing spins with the board.

Flex – The Custom V-rocker is a truly flexible board and you’ll feel it right away under your feet. Obviously this is where the rocker design comes in play.

Feel/Turning – The board feels light and steady through straight lines, but it’s when you start going faster that things get ‘iffy’. Although the board is stable under higher speeds, making turns is not the most natural thing with the Custom V-rocker. My guess is that the lifted tips make it extra hard to grab an edge if there isn’t enough snow on the surface. You’ll find yourself feeling somewhat off balance when making turns, so make sure you have enough space.

Park Riding - Naturally this board would fare well in the park and the reality is very close to that. Although I’m not a park person, I found myself wanting to spend more time in the park, because it’s a fun board for the park. Once again, the rocker design really helps as it softens the landings and makes spins easier to pull off. I highly recommend that you take this on boxes, but be careful with rails. The rocker shape will take some getting used to, but once you settle into it, you’ll enjoy the park very much. Unfortunately the half pipe was in bad shape so I couldn’t test this thing properly, but I felt a lot potential fun to be had from the few half pipe runs I got.

Stopping/Switching – Stopping with the Burton Custom V-rocker required more effort and space than expected. Like I said, the rocker design lifts up the tips so much that, unless there’s enough snow, holding an edge was more frustrating than expected. Switching on the other hand was SO MUCH fun. Given my disappointment with the turns and stops, I was stoked at how much fun this board was at switches. If it means anything to anyone, I’ve (un)officially renamed this board the Burton Buttertom V-rocker.

Pros

  • Rocker design is a lot of fun
  • Fun in the park
  • Amazing for buttering/switching and overall mucking about

Cons

  • Does not hold or grab as much edge as advertised/hyped

Overall Impression – Despite what Burton says about the Custom V-rocker being a “mountain monopolizer”, I regret to inform you that it isn’t. Unless snow conditions are great all over, you’ll find yourself frustrated with its stopping/turning abilities. Admittedly, snow conditions were (annoyingly) mostly icy, I still don’t think this stick is meant for all-mountain freestylers. But at the same time, if you’re going to stick around the park, you’re better off getting a park board. I feel the biggest culprit behind this is the imbalance between the traditional Custom feel and the V-rocker design. Needless to say, I’ve changed my mind about buying this board.

Who is this board for? If I really had to describe the ideal rider for this board, I’d say it’s for the intermediate freestyle rider that wants a bit more speed and more mountain ride time without sacrificing the goodness of effortless buttering, switching, and spinning.

Ride DH2 In-Depth Review

Posted in Editorial, Reviews, Snowboarding Gear, Snowboards by Mo | Tags: , ,

We’ve been getting a lot of requests for more details on the DH2 by Ride. There’s been a lot of buzz about this board among snowboarders for 2010. My friends that bought the board at the beginning of the season have fallen deeply in love with it and were hesitant to give it up for me to review it. After much negotiation, I managed to get my hands on one and really put it to the test on the slopes.

Setup: Ride DH2 155, ’08 Burton Cartel bindings, ’10 Burton Ion boots.

Location/Conditions: Mont Tremblant, Quebec, Canada. Machine groomed powder, kind of cold, North face of the mountain was a bit more on the powdery side.

Technology (worth mentioning)

  • Low-Rise Rocker – The area at the center of the board running between the bindings is dead flat but the board pivots up slightly in shape just outside each of the bindings towards each tip.
  • Carbon Pop Rods – Fiber-like structures in each of the tips give an added stiffness to the ends to enhance the pop of the board without adding stiffness to the core.
  • Carbon Rays – A technology being adopted by a lot of manufacturers that features rods running from your bindings to the edges for quicker power transfer.
  • Slimewalls – Ride’s coveted sidewall technology that features it’s own dampening system and is ultra durable for sliding on snow, metal, or wood.
  • Membrain Topsheet – Ultra light topsheet to reduce board weight.

First Impression – As the bottom graphic so casually puts it… HELLSYEAH. This is one super fun board that translates really well over the mountain but finds its roots in the park. Past all the marketing and tech, pressing rails and landing jumps just felt a lot better on this board.

Flex – The board had a relaxed, fun feel to it. It’s definitely stiffer between the bindings than in the tips to give it the best of both worlds in terms of freeride/freestyle riding. Overall, a nice ride.

Feel/Turning – Although the way this board is built in a very complicated way, it all comes together for a very natural, balanced feel. My first couple of runs felt great going relatively fast and transitioning slowly on longer S-shaped turns. Transitioning into turns was easier than I expected and held onto a carve very smoothly as opposed to being aggressive. At even higher speeds the board felt stable and damp thanks to the stiffer core but would chatter if I pushed it past this point. The board felt relatively light under my feet and the base was waxy and fast.

Powder Riding – Took the board to the North face of the mountain that had significantly more powder and really enjoyed the way it floated. In deeper pow situations, I did need to ride the back seat a little to prevent it from sinking but it never really happened. In choppy areas the board did get a little bumpy but nothing to worry about too much. Pulling switches and buttering around in the pow was effortless compared to my Vapor and was definitely a lot easier to swing around.

Park Riding – This board is well equipped for the freestyle park rider. Despite being a reverse camber, it had really nice pop to it that made the entrance and exits to boxes and rails very nice. You can jib your brains out with this thing. The stiffer core wasn’t so nice for balancing the center of the board on rails but it was still very doable. The rocker made landings very smooth. This is definitely something I noticed in comparison to my regular board, a Burton Vapor. The Vapor is always shaky for the first split second or two after a big landing and I need to smooth it out. The DH2 however just felt a lot more comfortable getting back to the snow from the air. The one place I didn’t particularly enjoy this board was in the pipe. I wasn’t expecting it to perform because of the rocker tech on it. It felt a little fussy and couldn’t hold on to the walls of the pipe properly.

Stopping/Switching – I loved the way this board dug into the snow. It was effortless and did it in such a way that you would expect out of a freeride board without the aggressive grip on the ice. The board also has a twin shape to it, which made riding switch a lot more comfortable and controlled. The transition to switch was a lot easier because of the rocker. You could spend the day buttering up the slopes with this thing.

Pros

  • Decent price for all the tech involved ($500).
  • Park board that you can charge the mountain with.
  • Natural, smooth switching.
  • Durable edges will last you longer than most boards.

Cons

  • Flex profile might not be suitable for everyone.
  • Tailored mostly for park riders.
  • Underperformer in the half pipe.

Overall Impression – Ride listened to snowboarders and tweaked the DH into this really cool all-mountain machine. If you live nearby a smaller resort and spend most of your time in the park, you’re going to love this thing. Outside the park, it will still keep up with your needs but won’t handle as well as a freeride board on very high speeds. Switching, buttering around, and just plain old fooling around just feels a lot cooler on this board. The jibbing experience on this thing is insane and to be honest, that might justify adding this stick to your arsenal. Definitely on my short list for 2010.

Top 5 Snowboarding Boots for 2010

Posted in Boots, Editorial, Reviews, Snowboarding Gear by Rami | Tags: , , , , , ,

With snowboarding season in full gear, I wanted to the time and spit out a list of the top 10 snowboarding boots for the season for both men and women. This is based on my research, reading endless numbers of (boring) reviews, comments, talking to people and my own personal experience with snowboarding boots. The list isn’t in any particular order (who can really say that one Boot is numerically better than another boot?) but you’ll notice that my personal favorite is numero uno!

1. Men’s Burton Ion - If you’re a regular reader of this blog you’ll know that the Burton Ion boots are my personal favorite. In my full Burton Ion review I only had good things to say about them. Given their balanced comfort level and stiffness, they are the ultimate snowboarding boots for the aggressive rider who likes to have fun. You’ll find yourself comfortable enough to bomb down a mountain while switching and taking jumps. Click here for full product details.

Made For: Freeriding/All-mountain

Pro’s

  • Amazing build quality, thus they last quite a bit – I’ve packed over 200 riding days in them and they are just like new
  • Very comfortable
  • Super responsive
  • Easy to put on and take off

Con’s

  • Expensive ($400)
  • Minor heel lift

Burton Ion


2. Men’s Burton Hail Coalition - Freestyle choice for the past number of years, this boot has all the essentials for park domination, including a softer yet supportive flex and an articulating cuff to keep it consistent. It also features traditional lacing for the perfect fit, plush cushioning throughout the sole to hinder the big impacts, and just an overall comfortable design. We recommend the Hail to any serious rider that is looking for a time-tested, softer boot to abuse in the park or around the mountain. Click here for full product details.

Made for: Freestyling/Park fun

Pro’s

  • Well priced ($249)
  • Easy to put on and take off
  • Minimal heel lift

Con’s

  • A bit too flexible for non-park riding
  • Uses traditional lacing system (personally, I prefer the Speed Zone lacing system)

Burton Hail Coalition

3. Women’s Roxy Track Lace – Made for the skills levels of beginner to intermediate, these Roxy boots are developed with comfort in mind. They have a padded spine panel, low rise calf pocket, triple density ankle pads, and 3 piece padded tongue. In addition, the boot has a memory foam liner to ensure even more comfort. Click here for full product details.

Made for: Freestyle/Freeride/All around snowboarding

Pro’s:

  • Well priced ($149)
  • Nicely designed
  • Comfortable

Con’s:

  • Traditional lacing system

Roxy Track Lace

4. Men’s ThirtyTwo Lashed - The Lashed is ThirtyTwo’s best selling boot. I dare you to find a boot with a better price that offers what the Lashed does: outstanding response, comfort, and versatility for everyone. Click here for full product details.

Made for: Freestlye/Freeride/All around snowboarding

Pro’s

  • Well priced ($199)
  • Light
  • Very responsive

Con’s

  • Not the sexiest looking boots

ThirtyTwo Lashed

5. Women’s Flow Lotus Boa Coiler - These boots offer great performance and comfort for a decent price. The BOA Coiler system is very useful for those who hate tying their boots and will amplify the close snug fit that you are always looking for. Along with that, you receive the Silver liner which is heat-moldable so you can acquire a perfect custom fit, and thus reduce heel-lift and sloppiness. Click here for full product details.

Made for: Freeriding/All-mountain snowboarding

Pro’s

  • Well priced ($189)
  • BOA lacing system
  • Comfortable

Con’s

  • None

Flow Lotus Coiler

So that sums up the top 5 snowboarding boots for 2010. Of course, boot feel and response will vary from person to person, but if you’re looking for a good pair of boots and don’t know where to start, this list is your answer.

Burton Jussi 2010 Review

Posted in Reviews, Snowboarding Gear, Snowboards by Rami | Tags: , , , ,

Burton Jussie 2010I’ve been wanting to get this board for a couple seasons now, and I finally did this season. After a few weeks riding the Burton Jussi, it’s time to put up a review.

Setup: Burton Jussi 159, Burton C60 (with the ICS adapters) bindings, Burton Ion Boots.
Conditions: machine groomed and very cold!

Technology
Twin Shape – this board is symmetrical and should feel the same whether riding regular or switch, though it has a directional flex pattern, meaning the nose has less pop/flex than the tail to maintain better stability at higher speeds.
Inifite Channel System – supposedly provides a more direct connection between the bindings and the board (I don’t buy it), while easily letting you mount your bindings any way you choose (this, I buy).
Freestyle Scoop – exaggerated spoon shape which creates a forgiving feel by turning the edges up at the tip and tail.

First Impressions: This is an excellent all mountain freestyle board for the aggressive rider in you with a lot of pop and spring to it. Given that this is Jussi Oksanen’s board (and designed by him), you can only expect it to be that good, but the board is a bit too stiff to rock just anywhere.

Flex/Stability: Stiffer in the tail, with more pop in the nose, but overall pretty flexible board and fun to ride. Burton’s feel/stiff rating is 6/10, but the board felt a little stiffer than that (think of it more of a relative thing). In any case, it works out well, because the board felt very stable compared to many other freestyle mountain boards. Buttering with the Jussi board was fun.

Park/Jumps: Taking off jumps with the Jussi is great, and landing is not too hard on the knees, but don’t get too excited, because this is not a park board. I definitely wouldn’t recommend jibbing with it too much, because it wasn’t designed for the park in the first place.

Carving/Switching: The board is stiff and tuned enough to hold its edge under pretty high speeds. Switching was a lot of fun and riding regular felt pretty much the same as switch – no board will ever feel the exact same riding switch or regular since humans are not anatomically symmetrical, but this is as good as it gets.

Pro’s:

  • Very playful thanks to the exaggerated spoon shape
  • Stable under high speeds
  • Switching is as natural as it gets

Con’s

  • $$$ – somewhat expensive
  • Not a fan of the board art
  • Not for the park and jibs

My thoughts: The Burton Jussie is a wicked board designed for anyone looking for a fun, yet aggressive stick. Moving forward, this is going to be my primary board (replacing my much more aggressive Burton T6)

If you have any questions about the board, please leave a comment and I will answer you!