Ride DH2 In-Depth Review

We’ve been getting a lot of requests for more details on the DH2 by Ride. There’s been a lot of buzz about this board among snowboarders for 2010. My friends that bought the board at the beginning of the season have fallen deeply in love with it and were hesitant to give it up for me to review it. After much negotiation, I managed to get my hands on one and really put it to the test on the slopes.

Setup: Ride DH2 155, ’08 Burton Cartel bindings, ’10 Burton Ion boots.

Location/Conditions: Mont Tremblant, Quebec, Canada. Machine groomed powder, kind of cold, North face of the mountain was a bit more on the powdery side.

Technology (worth mentioning)

• Low-Rise Rocker – The area at the center of the board running between the bindings is dead flat but the board pivots up slightly in shape just outside each of the bindings towards each tip.
• Carbon Pop Rods – Fiber-like structures in each of the tips give an added stiffness to the ends to enhance the pop of the board without adding stiffness to the core.
• Carbon Rays – A technology being adopted by a lot of manufacturers that features rods running from your bindings to the edges for quicker power transfer.
• Slimewalls – Ride’s coveted sidewall technology that features it’s own dampening system and is ultra durable for sliding on snow, metal, or wood.
• Membrain Topsheet – Ultra light topsheet to reduce board weight.

First Impression – As the bottom graphic so casually puts it… HELLSYEAH. This is one super fun board that translates really well over the mountain but finds its roots in the park. Past all the marketing and tech, pressing rails and landing jumps just felt a lot better on this board.

Flex – The board had a relaxed, fun feel to it. It’s definitely stiffer between the bindings than in the tips to give it the best of both worlds in terms of freeride/freestyle riding. Overall, a nice ride.

Feel/Turning – Although the way this board is built in a very complicated way, it all comes together for a very natural, balanced feel. My first couple of runs felt great going relatively fast and transitioning slowly on longer S-shaped turns. Transitioning into turns was easier than I expected and held onto a carve very smoothly as opposed to being aggressive. At even higher speeds the board felt stable and damp thanks to the stiffer core but would chatter if I pushed it past this point. The board felt relatively light under my feet and the base was waxy and fast.

Powder Riding – Took the board to the North face of the mountain that had significantly more powder and really enjoyed the way it floated. In deeper pow situations, I did need to ride the back seat a little to prevent it from sinking but it never really happened. In choppy areas the board did get a little bumpy but nothing to worry about too much. Pulling switches and buttering around in the pow was effortless compared to my Vapor and was definitely a lot easier to swing around.

Park Riding – This board is well equipped for the freestyle park rider. Despite being a reverse camber, it had really nice pop to it that made the entrance and exits to boxes and rails very nice. You can jib your brains out with this thing. The stiffer core wasn’t so nice for balancing the center of the board on rails but it was still very doable. The rocker made landings very smooth. This is definitely something I noticed in comparison to my regular board, a Burton Vapor. The Vapor is always shaky for the first split second or two after a big landing and I need to smooth it out. The DH2 however just felt a lot more comfortable getting back to the snow from the air. The one place I didn’t particularly enjoy this board was in the pipe. I wasn’t expecting it to perform because of the rocker tech on it. It felt a little fussy and couldn’t hold on to the walls of the pipe properly.

Stopping/Switching – I loved the way this board dug into the snow. It was effortless and did it in such a way that you would expect out of a freeride board without the aggressive grip on the ice. The board also has a twin shape to it, which made riding switch a lot more comfortable and controlled. The transition to switch was a lot easier because of the rocker. You could spend the day buttering up the slopes with this thing.

Pros

• Decent price for all the tech involved ($500).
• Park board that you can charge the mountain with.
• Natural, smooth switching.
• Durable edges will last you longer than most boards.

Cons

• Flex profile might not be suitable for everyone.
• Tailored mostly for park riders.
• Underperformer in the half pipe.

Overall Impression – Ride listened to snowboarders and tweaked the DH into this really cool all-mountain machine. If you live nearby a smaller resort and spend most of your time in the park, you’re going to love this thing. Outside the park, it will still keep up with your needs but won’t handle as well as a freeride board on very high speeds. Switching, buttering around, and just plain old fooling around just feels a lot cooler on this board. The jibbing experience on this thing is insane and to be honest, that might justify adding this stick to your arsenal. Definitely on my short list for 2010.

Related posts:

1. Burton Jussi 2010 Review
2. Review: 2010 Lib Tech Banana Magic
3. 2010 Ride Machete Review
4. 2010 Burton Custom V-Rocker Review: It’s Not What You Think
5. Burton Vapor 2010 Rider Review